Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

banner
Fluid Cell Remold

Polyurethane Parts For Fluid Cell Remold

For industries that depend on highly complex parts to keep their equipment functioning, PSI Urethanes recovers all sizes of Verson Wheelon Press Fluid Cells for metal forming applications in the aerospace industry.

As a leading manufacturer of cast urethane parts for fluid cell press and hydroforming systems, our durable urethane can withstand high forming pressures, enabling you to produce more intricate shapes and maintain an unvarying level of productivity.

The Forming Fluid Process

Urethane Parts For Fluid Cell Press

Pressure is applied through a direct acting, flexible, polyurethane fluid cell, which is an integral part of the press and confined in the roof of the cylindrical steel press housing. Hydraulic fluid is forced into the cell, causing it to inflate or expand. As the pressure builds up, the expansion creates a force required to flow the fluid cell downward over and around the metal blanks to be formed.

Urethane Parts For Fluid Cell Press

As the forming cycle progresses, the fluid cell follows the exact contour of the work pad, exerting even, positive pressure at all points of contact. As a result of the pad conformity to the tool or block, the sheet metal blank is literally wrapped to the exact shape desired.

Fluid Cell Covered Sizes

  • 20″ x 50″
  • 30″ x 96″
  • 36″ x 92″
  • 36″ x 120″
  • 36″ x 140″
  • 50″ x 120″
  • 50″ x 140″
  • 50″ x 164″
  • 50″ x 240″

PSI offers premium grade urethane

To support your fluid cell forming, PSI Urethanes offers premium-grade urethane for the following products:

  • Metal forming pads
  • Guerin box forming pads
  • Roll-up pads
  • Pressure intensification throw pads
  • Tray filler blocks and shoulders

The use of polyurethane overlays is a common practice to improve performance with part forming. The placement and geometric configuration of each overlay is in many cases an important consideration for reducing part wrinkling and tears. Urethane “throw pads” are also used to reduce wear on the press internal elastomer components.

Explore other Industries

We produce the highest quality custom urethane parts, offer a wide variety of cast polyurethane products, and can also create prototypes from your drawings or sketches.

See How We Serve Your Industry
Recommended Reads

Ask Our Experts.

Contact us today to learn how we can meet your project’s requirements.

* Indicates required field