Original Drain Protector - Square Drain Cover - 48" x 48" - Dual Layer - Stock# PSI-48

Description

Square Drain Cover – 48″ x 48″ – Chemical Resistant Dual layer Polyurethane – One side High Tack – One Side Low Tack for Easy Handling

The DrainProtector®️ provides high-visibility, rapid-response spill containment with a unique dual-durometer construction. We’ve combined an impact resistant surface layer with our signature tacky-seal technology to ensure that when a spill happens, your drains stay closed, and your protector stays intact. It is engineered for facilities where chemical protection must coexist with heavy-duty operations.

Tough Where it Counts: The top surface is designed for extreme durability, resisting impact and chemical abrasion. It allows responders to work around the drain without worrying about damaging the seal.
The Positive-Seal Bottom: Beneath the rugged exterior lies a super-tacky, ultra-flexible urethane base. This layer contours instantly to uneven grates and rough concrete, creating an airtight, liquid-tight “positive seal” that stops hazardous spills in their tracks.
Simple: Deploy in seconds. Clean in minutes. Reuse for years.

Additional information

Weight	48 lbs
Dimensions	8 × 8 × 51 in
Availability	Ships within 3-5 business days
Color	Yellow, Yellow / Orange
Material	Polyurethane
Key Benefits	Cost Efficient & Reusable Tacky Urethane for Positive Seal Chemically Resistant Environmentally Safe
How to use	1. Make sure the Drain Protector® Safety Seal is the correct size For best results, use a Drain Protector® Safety Seal that’s 6″ larger than the outside of the drain. 2. Apply the DrainProtector® Safety Seal Remove debris from the drain area you’re covering. Remove the plastic film from the Drain Protector® and save it to replace it after use. Place the Drain Protector® Safety Seal YELLOW SIDE UP over the drain, grate, or manhole you are sealing. 3. Wash the Drain Protector® Safety Seal before storage Wash the safety seal in warm water with a non-abrasive detergent or petroleum solvent cleaner. Dry with a cloth and re-apply the plastic film. Roll the Drain Protector® Safety Seal (ORANGE SIDE IN) around its original tube and place it back into the provided box.
Regulations and Compliance	SPCC\|OSHA
Chemical Compatibility	The Drain Protector® safety seal has a chemical compatibility rating of "Good" with the following chemicals: Acetone Chlorine Standard Solution (1000ppm) Ethanol (95%) Hydraulic Fluid Hydrochloric Acid (18.5%) Hydrogen Peroxide (30%) Isopropyl Alcohol Mineral Oil Chlorine Bleach (5% Sodium Hypochlorite) Sodium Hydroxide (40%) Sulfuric Acid (50%) Xylene Gasoline Antifreeze
Disclaimer	Due to the nature of softer urethane, its physical characteristics can change when subjected to varying temperatures, humidity levels, and UV exposure. For this reason, it’s essential to regularly inspect the stored product to ensure it stays in optimal, usable condition.

Reviews

There are no reviews yet.

Be the first to review “Original Drain Protector – Square Drain Cover – 48″ x 48″ – Dual Layer – Stock# PSI-48”

Original Drain Protector – Square Drain Cover – 48″ x 48″ – Dual Layer – Stock# PSI-48

Description

Additional information

Reviews

Related products

Drain Protector II – Square Drain Cover – 42″ x 42″ – Stock# PSI-42A

Drain Protector II – Square Drain Cover – 54″ x 54″ – Stock# PSI-54A

Drain Protector II – Round Drain Cover – 30″ – Stock# PSI-30AR